The TLR 22 5.0 DC Race Roller 2WD buggy is RC race-ready fast
With the Team Losi Racing 22 5.0 DC Race Roller 2WD RC buggy, you can compete and win in radio control 1/10 scale buggy racing without it costing a fortune or requiring long hours of kit building. The TLR 22 5.0 DC rolling chassis has been assembled at the factory for podium-worthy performance on dirt and clay RC racing tracks. This RC buggy has also been built to strict TLR Race Team specs. The engineering is top-of-the-line, combining many of the features that 1/10 scale RC buggy racers want most — including G3 12mm big bore shocks, updated steering geometry, a low-maintenance gear differential, and more. Install your electronics of choice in the prebuilt TLR 22 5.0 DC Race Roller chassis, add whatever tires give you the most confidence and control, and finish the included body with your own unique look. That’s all it takes before your TLR 22 5.0 DC Race Roller is fully prepared to put fear into the hearts of your RC racing competition!
Many parts used in the design of the TLR 22 5.0 Roller are the same ones preferred by the TLR Race Team drivers, including Stiffezel front suspension arms, soft mud guards, Stiffezel waterfall and standard rear suspension arms. Key components throughout the vehicle are made of composite materials and provide the tuning capabilities you need to dial in an unbeatable RC racing setup. You’ll be able to give your TLR 22 5.0 Roller the balance and consistency needed to carry you to the top.
The TLR 22 5.0 DC Race Roller maximizes your control in the corners
No detail is too small when your goal is to win the race, and the designers of the TLR 22 5.0 DC Race Roller have checked all of the critical boxes. For example, the RC racing buggy’s revised steering geometry — together with smooth G3 shocks and a 2mm chassis plate engineered for optimum flex — delivers in the corners to make all the difference. The improved mid-corner steering of the TLR 22 5.0 DC Roller allows you to keep up speed through the corners and leave your RC competition behind.
In fact, due to its updated steering geometry, many RC drivers credit the TLR 22 5.0 DC Race Roller with being one of the best-driving of all Team Losi Racing competition buggies. Improvements made to its steering bell cranks, spindle arms, and Ackermann angle help to make the TLR 22 5.0 RC buggy easier to steer at the low speeds needed for tight tracks and turns, while also increasing the smoothness of high-speed and off-center steering.
The plush handling of the G3 12mm Big Bore shocks included with the TLR 22 5.0 DC Race Roller also improve its performance when cornering. And that’s not all — they also allow you to change ride heights easily and use screws rather than e-clips to hold the pistons more securely. The flex and rigidity provided by the 2.0mm milled aluminum chassis is just right for smooth cornering on any RC racing track, and enables the TLR 22 5.0 Roller to come off jumps well-balanced and without bouncing, immediately ready to dig in and deliver more winning speed.
The TLR 22 5.0 DC Race Roller lets you dial in to win
The adjustment and tuning potential built into the TLR 22 5.0 DC Race Roller makes it easy to match your racing buggy’s performance to the requirements of any track. To achieve the perfect balance of steering and stability, there’s a third camberlink option between the inside and outside holes of the front camber block. The diff height and front roll center also accept numerous adjustments. The weight bias of the TLR 22 5.0 RC buggy can be adjusted easily by mounting optional brass ballast weights on the chassis, for the easiest driving on changing RC track conditions.
The new slipper pads of the TLR 22 5.0 DC Race Roller buggy’s Super Heavy Duty Slipper (SHDS) allow spur gears from 69T to 81T to be used. The slipper has also been optimized with new slipper plates, spring, spur gears, and an all new top shaft.
The TLR 22 5.0 DC Race Roller lets you create your own look
As a race roller, the 1/10 scale Team Losi Racing 22 5.0 DC is ready for its first RC race as soon as you install the electronics of your choice, mount your preferred tires, and paint the included, precut body. The body is lightweight but extremely durable. Finish it however you like for a look that’s all your own. The TLR 22 5.0 DC Race Roller also comes with front and rear wings for maximum stability as you’re speeding down the track and through turns.