TLR 22 3.0 Option Parts
TLR Direct Drive System
TLR Shock Oil

22SCT Ready-To-Compete: 1/10 2WD SCT

[ TLR03001 ]

Available For: $404.99*
Retail Price: $449.99
*Available at participating retailers Find a Retailer
Or
Buy Now

The 22�SCT RTC� vehicle is the next evolution of the 22 Platform. A first of its kind, this Ready-to-Compete� completion level of a Team Losi Racing� 1/10-scale short course truck requires no building, installation of electronics or detailing to get track-ready. The only thing between this model and a podium worthy finish is a battery, charger and a driver.

Featured Product Video

Ready-to-Complete

The Ready-to-Compete� completion level allows those who don't have the time or the desire to build a race-quality RC vehicle the opportunity to gain access to a race-bred machine that can compete at any level. RTC� vehicles are factory assembled and tuned to exact specifications. The vehicle is set to a neutral configuration and can be adapted to hundreds of tuning settings and options. The enclosed vehicle is same as the available model 22SCT kit, only assembled.

Chassis Call-Out

Chassis Callouts
  1. Rear-motor Completion
  2. 2.5mm Hard-anodized Aluminum Chassis
  3. Adjustable Caster View the Spindle Carrier. 10 Degree Included with Option (0, 3, And 5)
  4. 12mm Big Bore Aluminum Shock with Bladder Compensator
  5. 30� Front Kick
  6. All-metric Hardware
  7. Front and Rear Wheels are the Same Via 12mm Hex
  8. Gull Wing Suspension Arm Design (front)
  9. Rear Toe Adjustability
  10. Optimized Motor Placement for Balance
  11. Replaceable Bolt-on Front and Rear Camber Blocks
  12. Innovative Steering Rack Design
  13. 4mm Heavy Duty Turnbuckles
  14. Long-life Titanium Nitride Hinge Pins
  15. Vertical Mounted Ball Studs
  16. Optimized Battery Tray for Multiple Battery Configurations
  17. Dual Disk Slipper Clutch
  18. Secure Battery Straps

Features

Dynamite� platinum 17.5T Sensored System

Equipped with a powerful 17.5T Sensored brushless motor and ESC with LiPo cut-off. The Dynamite ESC comes with programmable timing and non-timing functions. Out of the box, the vehicle is programmed with non-timing (blinky) mode. Vehicle includes a spare pinion gear to accommodate the timing gear ratio.

Dynamite� platinum 17.5T Sensored System

Spektrum� DX2L Transmitter

The interference-free, 2-channel DX2L transmitter features Spektrum 2.4GHz DSM� technology. Featuring independent travel dials, throttle limiting switch and a steering dual-rate knob.

Spektrum� DX2L Transmitter

Viscous Gear Differential

Silicone-filled viscous gear differential is virtually maintenance-free, allowing more run time and less wrench time to increase the overall durability of the drivetrain.

Viscous Gear Differential

Extra High Torque Servo

Equipped with an extra-high torque digital servo that yields 140 oz-in of torque and a satisfying full range of speed. The servo utilizes full ball bearings and metal gears for enhanced precision and durability.

Extra High Torque Servo

Hard Anodized 12mm shocks

The largest shock bore in its class enables improved handling over bumps and improved jump recovery. The included aluminum shock caps include a bleeder screw for easy maintenance and rebuilding.

Hard Anodized 12mm shocks

High-Performance Body

Designed for optimal performance, the 22� SCT has a body that maximizes airflow around and through it.

High-Performance Body

4mm Heavy-Duty Turnbuckles

To meet the demands of short course racing, the 22 SCT is agile and built to last with 4mm heavy-duty turnbuckles.

4mm Heavy-Duty Turnbuckles

2.5mm Hard-Anodized Aluminum Chassis

The precision-machined 7075-T6 2.5mm aluminum chassis is hard-anodized for increased durability and a great look.

2.5mm Hard-Anodized Aluminum Chassis

Gull Wing Suspension Design

This design allows the overall height of the front tower to be much lower and lowers the center of gravity, which improves handling.

Gull Wing Suspension Design

High-Performance Tires

The tread pattern is an intermediate style tread pattern that offers consistent traction on low to medium grip tracks. The front tires are medium compound and the rear tires are a soft compound. The offset in tire compound compliment the vehicle's stock setup for most tracks.

High-Performance Tires

All Metric Hardware

Every piece of hardware on the 22SCT is metric so there is no guessing and no need for multiple sets of tools.

All Metric Hardware

Full Ball Bearing Equipped

The 22SCT RTC vehicle comes fully equipped with a set of high-speed, sealed ball-bearings to ensure maximum efficiency.

Full Ball Bearing Equipped

Spektrum Micro 3CH Receiver

The SR3520 DSM2� 3-channel micro receiver combines small size and low weight with the advanced speed of DSM2 technology. This 3-channel micro receiver combines the advanced speed of DSM2 technology with small size and low weight.

Spektrum Micro 3CH Receiver

22 Platform Spring Cross-Reference Chart

360 View

Image Gallery

Chassis Call-Out

  1. Dynamite® platinum 17.5T Sensored System
  2. Spektrum™ DX2L Transmitter
  3. Viscous Gear Differential
  4. Extra High Torque Servo
  5. Hard Anodized 12mm shocks
  6. High-Performance Body
  7. 4mm Heavy-Duty Turnbuckles
  8. 2.5mm Hard-Anodized Aluminum Chassis
  9. Gull Wing Suspension Design
  10. 12mm Big Bore Shocks
  11. All Metric Hardware
  12. Full Ball Bearing Equipped

Features

 
 
 
 
 
 
 
 
 
 
 
 

Product Specifications

Type:
2WD Short Course Truck
Scale:
1/10
Length:
21.65 in (550mm)
Width:
11.62 in (295mm)
Height:
7.87 in (200mm)
Ground Clearance:
1.93 in (49mm)
Wheelbase:
12.80 in (325mm)
Weight:
66 oz (1870g)
Chassis:
2.5mm, 7075-T6 Aluminum
Suspension:
Independent
Drivetrain:
2WD
Tire Type:
4.12 in (104.6mm) TLR SCT Tire
Motor or Engine:
Dynamite 540 (17.5T) Sensored Brushless
Speed Control:
Platinum Sensored ESC Timing/Blinky: 13.5T Limit
Radio:
Spektrum DX2L
Servos:
Extra High Torque Servo
Gear Pitch:
48
Wheel Size:
2.98 in (75.7mm)
Kit/RTR:
Ready-to-Compete
Shock Type:
Oil filled aluminum shokcs w/bleeder caps
Body:
TLR Hi-Performance SCT, Painted
Ball Bearings:
Throughout
Minimum Age Recommendation:
14 years

Needed to Complete

Battery and Compatible Charger

Support

Manuals

Parts Explosions

Setup Sheets

Articles, Reviews, How-Tos & More

Warranty

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

Team Losi Racing Limited Liability Warranty

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.


Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements

For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT


Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.


China: Electronics and engines requiring inspection or repair should be shipped to the following address:


Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060


Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.









Modified: 11/13/2012