TLR 22 3.0 Option Parts
TLR Direct Drive System
TLR Shock Oil

1/8 8IGHT 2.0 4WD Buggy Race Roller

[ LOSA0804 ]

Available For: $989.99*
Retail Price: $1,099.99
*Available at participating retailers Find a Retailer
Or
Buy Now

The 1/8 8IGHT 2.0 Buggy Race Roller features over thirty enhancements to the revolutionary 8IGHT. Improvements include a longer chassis with Tuned Flex Technology, lightened shock towers, a sure-close fuel tank, heavy duty dogbones and outdrives, a new rear hub design and more. At the 2008 IFMAR 1/8 Buggy World Championships the 8IGHT 2.0 Buggy proved to be the fastest buggy in qualifying taking Top Qualifying honors.

ROAR Electric Champion

Chassis Call-Out

Chassis Callouts
  1. NEW CHASSIS WITH TUNED FLEX
    TECHNOLOGY (TFT) 2.0
  2. NEW RADIO TRAY DESIGN
  3. HEAVY DUTY REAR OUTER HINGE PINS
  4. UPDATED STEERING GEOMETRY AND SERVO SAVER
  5. SURE-CLOSE FUEL TANK CLOSURE
  6. LIGHTENED SHOCK TOWERS
  7. EXTENDED REAR DRIVESHAFT
  8. REDESIGNED SUSPENSION GEOMETRY
  9. HEAVY DUTY DOGBONES AND OUTDRIVES
  10. REINFORCED REAR BEARING INSERT SYSTEM
  11. HEAVY DUTY BRAKE DISKS
  12. LASER ETCHED ENGINE MOUNTING GUIDES
  13. CENTER DRIVESHAFT GREASE BOOTS
  14. EFRA APPROVED FUEL LINE KIT

Features

New Rear Hub Design

The 8IGHT 2.0 features a new rear hub design that incorporates a new inner camber link, a revised shock tower with simplified camber locations and the durability of 3.5mm outer rear hinge pins.

Mid and Rear Motor Mounting Options

New Chassis with Tuned Flex Technology (TFT)

The 8IGHT 2.0 chassis has been extended an additional 2mm, offering added stability and handling across all track conditions. This offers the 8IGHT 2.0 the ability to carry more speed into and out of corners, and to glide across washboard sections with ease. Tuned Flex Technology also provides significant handling gains by responding precisely to changes in terrain without sacrificing balance and grip. Team Losi Racing has also added laser etched lines to ensure perfect motor alignment

High-Performance Body

Revised Radio Tray Design

The radio tray on the 8IGHT 2.0 has been revised and reengineered to optimize the position of the servos, increasing response and reducing stress on the throttle servo at the same time. This design allows for increased precision from the throttle servo without added weight.

Rear Bumper Option

Precision Steering Geometry and Servo Saver

Improving on the 8IGHTs original steering design was a difficult task, but the engineers at Team Losi Racing have managed to increase the consistency of the servo savers operation by further tweaking the steering geometry. Additional gains in steering precision were made by incorporating a new, pressed-steel bushing in the Ackermann brace for reducing friction over the entire range of motion.

4mm Heavy-Duty Turnbuckless

Sure-Close Fuel Tank

Every second counts on race day, and fast fuel fills are crucial to getting back in the race. With a new, sure-close fuel tank design, the tank lid is designed for automatic, positive closure each time, preventing air from getting in the fuel system and affecting performance.

Complete Kit

Lightened Shock Towers

The high-quality 7075 aluminum shock towers on the 8IGHT 2.0 have been strengthened and lightened at the same time. By optimizing the design for rigidity, Team Losi Racing engineers were able to reduce the weight for improved on-track performance without sacrificing handling or strength.

2.5mm Hard-Anodized Aluminum Chassis

Heavy Duty Dogbones and Outdrives

With the increased horsepower demands of 1/8-scale buggy racing, Team Losi used improved steel materials on the dogbones and outdrives of the 8IGHT 2.0 to stand up to the abuse. These heavy-duty components have been designed to withstand the punishment associated with serious off-road competition.

Gull Wing Suspension Design

Updated Suspension Geometry

The suspension on the 8IGHT 2.0 features numerous shock mounting locations for several options in adjusting the suspension setup. The front carrier also features two camber link positions while the rear has four, allowing for even greater customization to varying track conditions.

T12mm Big Bore Shocks

Winner of RC Car Action's Editors' Choice Award for 2009 Car of the Year, as well as Readers' Choice for Nitro Buggy. ROAR National Champion - 2007, 2008, 2009

Chassis Call-Out

  1. Extended chassis with Tuned Flex Technology (TFT) 2.0
  2. Radio tray design optimizes the position of the servos
  3. Heavy-duty rear outer hinge pins
  4. Updated steering geometry and servo saver
  5. Sure-Close fuel tank closure
  6. Lightened shock towers
  7. Extended rear driveshaft
  8. Redesigned suspension geometry
  9. Heavy-duty dogbones and outdrives
  10. Reinforced rear bearing insert system
  11. Heavy-duty brake disks
  12. Laser etched engine mounting guides
  13. Center driveshaft grease boots
  14. EFRA approved fuel line kit

Features

 
 
 
 
 
The 8IGHT 2.0 chassis has been extended 2mm, offering added stability and handling across all track conditions. This offers the 8IGHT 2.0 the ability to carry more speed in and out of corners and glide across washboard sections with ease. Tuned Flex Technology also provides significant handling gains by responding precisely to changes in terrain without sacrificing balance and grip.
 
 
 
 
The high-quality 7075 aluminum shock towers on the 8IGHT 2.0 have been strengthened and lightened at the same time. By optimizing the design for rigidity, Team Losi Racing engineers were able to reduce the weight for improved on-track performance without sacrificing handling or strength.
Improving on the 8IGHT’s original steering design was a difficult task, but the engineers at Team Losi Racing have managed to increase the consistency of the servo saver’s operation by further tweaking the steering geometry. Additional gains in steering precision were made by incorporating a new, pressed-steel bushing in the Ackerman brace for reducing friction.
The radio tray on the 8IGHT 2.0 has been revised and reengineered to optimize the position of the servos, increasing response and reducing stress on the throttle servo at the same time. This design allows for increased precision from the throttle servo without added weight.
Every second counts on race day, and fast fuel fills are crucial to getting back in the race. With a new, Sure-Close fuel tank design, the tank lid is designed for automatic, positive closure each time, preventing air from getting in the fuel system and affecting performance.
With the increased horsepower demands of 1/8-scale buggy racing, Team Losi Racing used improved steel materials on the dogbones and outdrives of the 8IGHT 2.0 to stand up to the abuse. These heavy-duty components have been designed to withstand the punishment associated with serious off-road competition.
The 8IGHT 2.0 features a new rear hub design that incorporates a new inner camber link, a revised shock tower with simplified camber locations and the durability of 3.5mm outer rear hinge pins.
 
 
 
 
 
 
 
 
 

Product Specifications

Type:
Competition Buggy Race Roller
Scale:
1/8
Length:
19.56 in (497mm)
Width:
12.13 in (308mm)
Wheelbase:
12.71 - 12.87 in (323 - 327mm)
Chassis:
Tuned Flex Technology 2.0
Drivetrain:
4WD
Kit/RTR:
Race Roller
Body:
Clear Polycarbonate Buggy

Needed to Complete

.21 Buggy Engine
Tuned Exhaust System
2-Channel Radio System with High-Torque Servos
Receiver Battery
Glow Driver
Starter Box
Nitro Fuel
Paint for Polycarbonate Body

 

Support

Manuals

Parts Explosions

Setup Sheets

Warranty

Team Losi Racing Limited Liability Warranty

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.


Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements

For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT


Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.


China: Electronics and engines requiring inspection or repair should be shipped to the following address:


Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060


Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.









Modified: 11/13/2012

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.